Hornady 95851 Premium Safe Anchoring Kit

Please make sure the Hornady 95851 Premium Safe Anchor Bolts will fit your safe. They are designed for the Hornady Safes but will work with any safe that has a 3/8" anchor hole. 

Because many safes come with anchor holes but no anchor bolts, Hornady is offering the 95851 Premium Safe Anchoring Kit to secure your safe to a solid surface. Or, maybe you need to move your safe to a new location and need new anchor bolts. This is the perfect solution.

The Hornady 95851 Premium Safe Anchoring Kit comes with (4) 3/8" concrete anchor bolts, nuts, and washers. It also comes with a 3/8" carbide concrete drill bit and a 9/16" deep socket. To level your safe to make sure it doesn't tip over, it also comes with (4) polymer leveling shims. A dusting cloth keeps everything nice and clean. 

1. To anchor your safe using the Hornady 95851 Premium Safe Anchoring Kit, place your safe in the desired location and use the included shims to level.
2. Use the holes in the bottom of the safe to mark your anchor locations.
3. Use a hammer drill and the included concrete bit to drill each hole at least 3" deep into the concrete floor. Make sure to follow the instructions for your particular hammer drill.
4. Insert the anchor bolts through the safe floor and into the drilled holes. A hammer may be needed to tape the bolts into the holes.
5. Tighten the nuts using a 3/8" drive socket wrench and the included socket until the anchors expand tightly into place.
6. Clean up and the job is done!

If you have any questions regarding the Hornady 95851 Premium Safe Anchoring Kit, please give us a call at 800-207-2259.

Features:

• Four (4) 3/8" concrete anchor bolts, nuts, and washers
• One (1) 3/8" carbide concrete drill bit
• One (1) 9/16" deep socket
• Four (4) polymer leveling shims
• One (1) dusting cloth

Tools Needed:

• Hammer
• 3/8" Drive Socket Wrench
• Hammer Drill

CALIFORNIA RESIDENTS

WARNING: Cancer and Reproductive Harm -